|
Our
Series TM cylinders, with suitable electronics, can monitor the position
and velocity of the piston. It is based on our popular Series B cylinder
with provision for mounting an LVDT (Linear Velocity Displacement
Transducer) and magnet from Temposonic, Balluff, or any other
manufacturer.
The transducer assembly is mounted into the blind end of the cylinder. The
magnet is housed in a stainless steel piston nut and the probe is inserted
into a blind hole in the rod. The rod is drilled from one end only, which
makes for a much stronger rod end than one that is drilled from both ends.
A male thread is standard for the rod end. Therefore, any size and style
of accessory with female threads is available. Female threads in the rod
end can be accommodated, but the rod extension must be increased by the
depth of the threads.
The transducer head is safely protected inside a sealed housing. Since the
back end of the cylinder must be clear to withdraw the probe, the
available mounting styles are front and mid trunnion, front and rear
flange and foot mount.
The pressure rating is 3000 psi operating and 5000 psi non-shock and fixed
cushions at both ends of the cylinder are standard with series TM.
Options are avaliable to mount a variety of servo or proportional valves
on the cylinder.
|
Size: 575KB
Click on "PDF FILE" to see detailed specs and information about the cylinder.
|
